User Guide

Power Mac G4 Cube Take Apart - 99
Optical Drive
11. Install the screws, but do not tighten until all four are in place. Do not overtighten.
12. Close the AirPort Card door and secure the antenna cable (and AirPort Card).
13. Starting with the two bottom tabs, attach the side panel as shown. Ensure all four tabs
engage and no cables get caught.
14. Important: Ensure the side panel tucks into the chassis.
15. Reassemble and test the computer.
Warning: Never turn on the computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage the computer or cause injury.