7

• Batch Capture dialog: If you are batch capturing clips, deselect the Use Logged Clip
Settings checkbox. In this case, individual clip settings will be overridden by the current
video and audio track selection in the Clip Settings tab of the Log and Capture window.
Make sure this option
is not selected.
Changing Capture Settings
If you’ve already specified a scratch disk and selected an Easy Setup for the setup you’re
using, you don’t need to change the capture settings. However, if you’ve changed
equipment or your Easy Setup, you may need to modify your capture settings. For more
information, see “Capture Settings and Presets.”
To choose different capture settings
1 In the Log and Capture window, click the Capture Settings tab.
2 From the Device Control pop-up menu, choose an option.
3 From the Capture/Input pop-up menu, choose an option.
4 If you need to specify a different scratch disk or add others, click Scratch Disks, choose
your options, then click OK.
For more information, see “Specifying Scratch Disks.”
276 Chapter 17 Logging from Tape