6

Table Of Contents

Chapter 21 Adding Transitions 391

III

Push One source image replaces another, both images moving at the

same time. For example, the first clip occupies the entire frame,

then the second clip pushes in from the right while the first clip

slides out to the left.

Unlike the slide effect, both sources are moving. The push effect

executes from the top, right, bottom, or left.

Radial The first clip sweeps in a radial (or semi-circular) way to reveal the

second clip.

Slide The second clip slides onto the screen to cover the first clip. The

angle from which the second clip enters the frame is stored in a

parameter, with 0 degrees being the top of the screen.

Wipe The first clip wipes to reveal the second clip.

Zoom One clip zooms in or out of the other clip.

Slide

Band Slide Bands of the first clip slide in parallel directions to reveal the

second clip. You can adjust the number of bands and the slide

direction.

Box Slide Bands of the first clip slide one at a time in perpendicular directions

to reveal the second clip. You can adjust the number of bands and

the slide direction.

Center Split Slide Reveals the underlying clip by splitting the current clip down

the center and horizontally sliding the two halves away from

each other.

Multi Spin Slide Boxes of the first clip spin and zoom out to reveal the second clip.

You can adjust the spin about the center of the first clip and the

spin about the center of the box, as well as the number of boxes.

Push Slide The second clip pushes the first clip out of view. You can adjust the

push direction.

Spin Slide Boxes of the first clip spin and zoom out to reveal the second clip.

You can adjust the spin about the center of the box and the

number of boxes.

Split Slide The first clip splits at specific points and slides to reveal the second