5

Chapter 18 Logging Clips 255
IV
 Batch Capture dialog: If you are batch capturing clips, deselect the “Use Logged Clip
Settings” checkbox. In this case, individual clip settings will be overridden by the
current video and audio track selection in the Clip Settings tab of the Log and
Capture window.
Changing Capture Settings
If you’ve already specified a scratch disk and selected an Easy Setup for the setup you’re
using, you don’t need to change the capture settings. However, if you’ve changed
equipment or your Easy Setup, you may need to modify your capture settings. For
more information, see Volume IV, Chapter 24, “Capture Settings and Presets.”
To choose different capture settings:
1 In the Log and Capture window, click the Capture Settings tab.
2 From the Device Control pop-up menu, choose an option.
3 From the Capture/Input pop-up menu, choose an option.
4 If you need to specify a different scratch disk or add others, click Scratch Disks, choose
your options, then click OK.
For more information, see “Specifying Scratch Disks for Capturing Video
and Storing Render Files” on page 171.
Make sure this option
is not selected.