User Guide

Chapter 6 Working With Panasonic P2 Media 99
To set up Final Cut Pro and an AG-HVX200 camcorder for output to P2 cards:
1 Connect the camcorder and computer using a 4-pin-to-6-pin FireWire cable.
2 On the camcorder, do the following:
a Choose Camera mode.
b Press the Menu button.
c Choose the Recording Setup menu and then select REC FORMAT.
d Set the REC FORMAT to the format of your footage in Final Cut Pro.
For example, if your footage is DVCPRO HD 720p60, select 720P/60P.
e Press the mode button to switch to MCR/VCR mode.
f Press the AUDIO DUB/THUMBNAIL button.
If the current video playback setting in Final Cut Pro does not match the camcorder
recording mode, you may see “1394 INPUT ERROR” flashing on the camcorder display.
g Press the Menu button and choose the RECORDING SETUP menu.
h Turn on the 1394 TC REGEN and 1394 UB REGEN options, then press the Menu button
to exit the menu.
3 In Final Cut Pro, choose View > Video Playback, then choose the format you want to
output via FireWire.
For example, if you want to output 720p60 footage and the camcorder recording mode
is set to 720P/60P, you should choose View > Video Playback > DVCPRO HD (720p60)
(1280 x 720).
4 Open a clip in the Viewer or a sequence in the Timeline whose format matches the
recording mode of the camcorder.
5 Choose View > External Video > All Frames.
The current frame in the Viewer or Canvas appears in the camcorder display. If the
current frame does not appear, start over from step 2.
6 Do one of the following:
 Choose File > Print to Video, choose your output options, then click OK.
 Press the Space bar to begin playing your footage directly in the Viewer or Timeline.
Note: For best results, disable the Automatically Start Recording option in the Print to
Video window.
7 On the camcorder, press the red and gray record buttons simultaneously.
8 When you have finished recording, press the Pause/Set button on the camcorder and
then press the Down menu button.
To verify that a clip was created on the P2 card in the camcorder, press the AUDIO DUB/
THUMBNAIL button on the camcorder, navigate to the thumbnail for the clip you just
recorded, then press the Up menu button to play the clip.