User Guide

Chapter 1 Working With HDV 21
Marking Controls
Use these to set In and Out points for a clip on tape.
 Mark In (I): Click this to set the In point for a clip on tape.
 Clip In Point Timecode field: Shows the timecode value of the currently set In point.
 Go to In Point: Click this to cue the connected VTR to the currently set In point.
 Mark Out (O): Click this to set the Out point for a clip on tape.
 Clip Out Point Timecode field: Shows the timecode value of the currently set Out point.
 Go to Out Point: Click this to cue the connected camcorder or VTR to the currently set
Out point.
Tabs in the Log and Capture Window
The Log and Capture window has several tabs:
 Logging: Use this tab to add descriptive information to each clip that you log, such
as reel name, scene/take number, log notes, markers, and so on. Much of this
information can also be added later in the Browser.
Mark In
Clip Out Point
Timecode field
Go to Out Point
Go to In Point
Mark Out
Clip In Point
Timecode field
New bin button
The Log Bin button
contains the name of the
currently selected
logging bin.
Logging fields
Marker controls