User Guide

32
Updating Uncompressed 8- and 10-Bit PAL Easy Setups
The field dominance settings of the capture and sequence presets within the
Uncompressed 8- and 10-bit PAL Easy Setups are now both properly set to Upper
(Odd). The Final Cut Pro 5.0.3 installer copies an updated version of these Easy Setups
into each language folder within /Applications/Final Cut Pro Additional Easy Setups/.
To make the Uncompressed 8- and 10-bit PAL Easy Setups available for use
in Final Cut Pro:
1 In the Finder, navigate to /Applications/Final Cut Pro Additional Easy Setups/, then
open the folder for the language you prefer.
This folder contains the updated versions of the Uncompressed 8- and 10-bit PAL
Easy Setups.
2 Choose File > New Finder Window (or press Command-N), then navigate to /Library/
Application Support/Final Cut Pro System Support/Custom Settings/.
This folder contains the older version of the Uncompressed 8- and 10-bit PAL Easy Setups.
3 Select the updated version of the Uncompressed 8- and 10-bit PAL Easy Setups.
Note: If you are using the Japanese version of Final Cut Pro 5.0.3, also include the
Uncompressed 8- and 10-bit NTSC Easy Setups in your selection.
4 Do one of the following:
 Choose File > Copy (or press Command-C), click in the Custom Settings window,
then choose File > Paste (or press Command-V).
 Option-drag the updated version of the Uncompressed 8- and 10-bit PAL Easy Setups
to the Custom Settings window.
Note: Users of the Japanese version of Final Cut Pro 5.0.3 must also Option-drag
Uncompressed 8- and 10-bit NTSC Easy Setups.
5 If a Copy dialog appears asking if you want to replace the Easy Setup files, click Replace.