Specifications

Sony NXCAM Workflows in Apple Final Cut Pro 7
INTRODUCTION
The HXR-NX5E is Sony’s first NXCAM branded camcorder. This document explains how to
edit video recorded by this camcorder using Apple Final Cut Pro.
HXR-NX5E and the NXCAM Product Line
NXCAM is Sony’s newest product line designed for professionals. NXCAM provides powerful
features for professional video production, such as HD-SDI output, flexible media selection,
and stunning AVCHD picture quality.
The HXR-NX5E camcorder incorporates cutting-edge technologies, such as G Lens, an
Exmor™ CMOS sensor, built-in GPS receiver, and a new Active SteadyShot® mode.
Flexible Selection of Recording Media
Various recording media are available in the HXR-NX5E:
♦ Memory Stick PRO Duo (Mark2)™ media, Memory Stick PRO-HG Duo™ media,
Memory Stick PRO-HG Duo HX™ media*
♦ SD/SDHC Memory Card**
♦ Flash Memory Unit (Sony HXR-FMU128)
*Compatible "Memory Stick" type: For AVCHD recording / Capacity: more than 1GB,
for standard definition recording / Capacity: more than 512MB
**Recommended Speed Class For AVCHD recording / Class 4 or higher, For standard
definition recording / Class 2 or higher)
Dual Memory Card Slots
The HXR-NX5E has two memory card media slots for recording. Use of Sony‚s Memory Stick
PRO Duo and Memory Stick PRO Duo HG are recommended media cards.
The HXR-NX5E records to one memory card slot at a time. With two memory cards installed,
the camcorder provides continuous, seamless recording of long scenes, and maximises the
utilisation of each card’s storage capacity.
As the card in Slot A reaches its capacity, recording is automatically switched to the card in
Slot B. The card in Slot A may then be removed and replaced. When the card in Slot B fills to
capacity, another seamless switch back to Slot A occurs.
This unique dual slot configuration provides continuous recording.
Page 1 of 22