Technical information

3 Place the DRAM DIMMs in the DRAM slots as pictured.
The DIMM fits into the slot only one way. Align the notches in the DIMM with the small ribs inside the
slot. With the ejector in the open position (as shown), push down on the DIMM until it snaps into
place. The ejector closes automatically.
Important Do not touch the DIMM’s connectors. Handle the DIMM by the edges only.
DRAM DIMM (Your DIMM’s shape and components may vary.)
Ejector
(in the
“open”
position)
Connectors Notches DRAM slot (1 of 2)
Ribs (inside slot)
Installing
Expansion
Cards and
Memory
183