Technical information

6 Attach your T-connector to the port on your card.
It may help to use two hands. With one hand, push the T-connector into the port. While still holding
the T-connector, use the fingers on your other hand to twist and lock the connector into place.
Pull the T-connector to test whether it is locked securely onto the port.
7 Start up your computer.
Next, see “Setting Up Your Network Connection” later in this chapter for information on configuring
your network connection.
Ethernet port (thin coaxial) T-connector
Thin coaxial cable (or thin
coaxial Ethernet terminator
if your computer is the last
device on the network)
Thin coaxial cable
Chapter
Six
94