Technical information

3 Attach the LocalTalk adapter to the printer port (marked with the [ icon) located behind the cover
plate you removed, and press the cable into the cable guides. Then attach a network cable between the
LocalTalk adapter connected to your computer and the last LocalTalk adapter on your existing network.
Use the LocalTalk cable that comes with the Apple LocalTalk Locking Connector Kit DIN-8. Or, if you
are using the Apple LocalTalk RJ-11 Connector, use a standard telephone cable with RJ-11 connectors.
Printer port
Cable guide
Your LocalTalk adapter
Last LocalTalk adapter
on the existing network
LocalTalk cable
(or a telephone cable if you’re using an Apple LocalTalk RJ-11 connector)
Chapter
Six
88