User Guide

eMac ATI Graphics/ USB 2.0/2005 Take Apart - 83
Antenna Board (eMac ATI Graphics)
Antenna Board (eMac ATI Graphics)
Tools
This procedure requires the following tools:
• Phillips #2 screwdriver
• Needlenose pliers or flat blade screwdriver
Part Location
Preliminary Steps
Before you begin, do the following:
• Remove the AirPort Extreme card
• Place the computer face down on an ESD mat.
• Remove the user access door.
• Remove the feet.
• Remove the rear housing.
• Discharge the CRT.
• Remove the fan.