User`s guide

Chapter 2. Installing the Kurzweil 3000 Network
Kurzweil 3000 for Macintosh Network Guide 25
Verifying Client Connections
To test a new client connection:
1. Go to a Kurzweil 3000 client computer.
2. Double-click the Kurzweil 3000 icon.
A message appears stating that the client is connecting to the Engine you
designated during the installation procedure.
Depending on the selected Engine options, Kurzweil 3000 either starts
up, or the Log In window appears.
3. In the Log In window, again depending on the selected Engine options,
you will need to supply one or both of the following pieces of information:
User Name: As you are adding a new user, click Select a User, and
select New User.
Type a name in the User Name box, and click Add. Kurzweil 3000 adds
the name to the User Name list, and on subsequent log ins, you can just
select it.
Remember, New User only appears if Allow Clients to Create
Accounts is selected in the Engine’s Settings window.
Product Type: Choose a Kurzweil 3000 product from the Product Type
menu.
Remember this menu only appears if Allow Clients to Change Product
Types is selected in the Engine’s Settings window.
4. Click Log In.
The selected Kurzweil 3000 product type launches. If you now check the
Administrator, you will see this user in the User list.