Product specifications

Table Of Contents
Installation Check Lists
18
Updating Intel Drivers on Cluster Systems
Do not install or update Intel NIC drivers on cluster systems after the cluster setup is complete.
Due to the technical aspects of changing resources and devices on a cluster, this can lead to
problems with the cluster software and possible data loss.
Deleting the Intel drivers on an establised cluster system could compromise the integrity of the
cluster. In general, do not update the hardware drivers on a cluster system unless instructed to do
so by the Interplay Readme or Customer Support.
n
If you are reimaging the system as part of an upgrade then you can take the opportunity to
update the Intel NIC drivers at that time.
Installation Check Lists
This section contains the following check lists:
Overall Interplay Installation Check List
Media Indexer Installation Check List
For information about installing the Interplay Streaming Server, see “Check List for Installing
and Configuring the Streaming Server Software” on page 115.
Overall Interplay Installation Check List
The following check list provides an overall view of an Interplay installation.
Check List for Installing Interplay Components
Task Section Reference
Review the recommendations in the Avid Products and
Network Site Preparation Guide.
Determine your Media Indexer server configuration. See the Avid Interplay Best Practices guide.
Determine where the Avid Lookup Service is running
or where it will run. The Lookup service is part of the
Avid Service Framework.
See “Installing the Lookup Service on a
Separate Server” on page 104, and
“Connecting Systems Directly to the Lookup
Service” on page 106.
If you use AirSpeed Multi Stream or AirSpeed 5000
systems, refer to the associated installation guides.
See the Avid AirSpeed 5000 Setup Guide or
the AirSpeed Multi Stream Installation and
User’s Guide.