Product specifications

Table Of Contents
Streaming Server Configuration
114
Partitions on the AS3000 Interplay Streaming Server
The AS3000 Interplay Streaming Server ships with two 1 TB (930 GB) drives that are mirrored
by the embedded Intel RAID controller. The RAID1 array contains the following partitions:
An unmapped 10GB recovery partition
C:\ with 80 GB of storage
D:\ with the remaining 840 GB of storage
If you are using the AS3000 to host an Interplay v2.3 Stream Server, you can add an optional
expansion kit that adds 4 TB of unmirrored storage. For additional information, see the Avid
Interplay Streaming Server AS3000 Expansion Kit Upgrade Readme. on the Knowledge Base.
Port and Firewall Usage for the Interplay Streaming Server
To enable streaming from the Interplay Streaming Server to Interplay Access clients, the network
has to allow the following TCP and UDP traffic:
For TCP, the network must allow direct client/server communications through server port
554 TCP.
For UDP packets, any firewall between Access clients and the streaming server must be
configured either to allow RTSP/RTP traffic or to allow UDP packets between clients and
server. The UDP streaming traffic uses dynamic random ports and not a fixed port range.
This port and firewall usage applies to both SR2500 and AS3000 servers.
n
If UDP packets are lost on the way from the server to the client there is no direct feedback. The
Streaming Server does not get any feedback that the packets were lost, and the Access client must
wait until a timeout occurs.