User`s guide

Apple II Csa2 FAQs: DOS & ProDOS, Part 6/25 Note from archiver<at>cs.uu.nl: This
page is part of a big collection of Usenet postings, archived here for your
convenience. For matters concerning the content of this page, please contact its
author(s); use the source, if all else fails. For matters concerning the archive
as a whole, please refer to the archive description or contact the archiver.
Subject: Apple II Csa2 FAQs: DOS & ProDOS, Part 6/25
This article was archived around: 07 Jun 2009 08:31:43 GMT
All FAQs in Directory: apple2/faq
All FAQs posted in: comp.sys.apple2
Source: Usenet Version
Archive-name: apple2/faq/part6
Posting-Frequency: monthly
Last-modified: 2009/06/01
URL: http://home.swbell.net/rubywand/A2FAQs1START.html
The comp.sys.apple2 Usenet newsgroup Apple II FAQs originate from
the II Computing Apple II site, 1997-2009.
Csa2 FAQs file ref: Csa2DOSMM.txt rev135 June 2009
DOS & ProDOS
001- What is a "DOS"?
002- What DOS's are available on Apple II computers?
003- Are there any faster better versions of DOS 3.3?
004- What commands are available in DOS 3.3?
005- How do I use DOS commands from the keyboard? a program?
006- How do I use variables in a DOS command?
007- How do I create new DOS 3.3 diskettes?
008- How much storage space is on a 5.25" diskette?
009- Can I format a DOS 3.3 diskette for just data storage?
010- What is the "Volume Table of Contents" or "VTOC"?
011- Can I assign names to my DOS 3.3 diskettes?
012- What does it mean to "Boot" a disk?
013- What file types does DOS 3.3 have
014- What do the entries in a DOS 3.3 Catalog display mean?
015- Re. DOS 3.3 file names: How long? What characters are legal?
016- How can I use DOS 3.3 to read/write sectors from machine code?
017- How many 'official' versions of DOS 3.3 are there?
018- How can I find out the address and size of a BLOADed file?
019- What information is included in the VTOC and Catalog sectors?
020- How does DOS 3.3 remember which sectors are used?
021- What are the formats of DOS 3.3's main file types?
022- How can I run DOS 3.3 programs from 3.5" disks and hard disk?
023- How can I get DOS 3.3 from the net without an A2 tcom utility?
024- What is ProDOS?
025- What are ProDOS's major features?
026- Which Apple II's can run which versions of ProDOS?
027- How can I create bootable ProDOS diskettes?
028- How do I make a ProDOS disk that will boot and start a BASIC program?
029- What is the maximum size of a ProDOS volume?
030- How do I LOAD, SAVE, etc. files under ProDOS?
031- What is a "pathname"?
032- What is the default volume and folder when ProDOS boots?