User`s guide

4- To hear music played from a CD, Stereo headphones, speakers, or hi-fi cables
need to be plugged into the CD ROM drive. Most drives have a mini- Stereo socket
in the front. To fit the socket, the plug for your headphones, etc. must be a
Stereo plug.
5- A Driver file which matches your interface card. For RamFAST, it is
Ramfast.Driver. For Apple SCSI cards it is SCSI.Manager and SCSICD.Driver. The
Driver file(s) should be in the SYSTEM/DRIVERS/ folder (i.e. the DRIVERS folder
in the SYSTEM folder). To avoid conflicts, RamFAST users should remove
SCSI.Manager, SCSICD.Driver, and other Apple "SCSI ..." drivers from the
SYSTEM/DRIVERS/ folder.
6- In order to play standard Music CD's via your computer, you should have the
following:
• A Media Driver which matches your CD-ROM drive. For example, RF.NEC is a
driver supplied with RamFAST which works with NEC drives. The Media Driver
should be in the SYSTEM/DRIVERS/MEDIA.CONTROL/ folder.
• A standard System 6 control panel file (i.e. a "CDEV") named
"MediaControl". MediaControl should be in the SYSTEM/CDEVS/ folder
• A standard System 6 media control New Desk Accessory file (i.e. an "NDA")
named "MediaControl.DA". MediaControl.DA should be in the
SYSTEM/DESK.ACCS/ folder.
7- In order to access files on data CD-ROM discs (like DigiSoft Innovation's
Golden Orchard CD), the standard System 6 High Sierra file system translator
file (HS.FST) should be in the SYSTEM/FSTS folder. This lets you read ISO 9660
format data CD-ROM discs. You should already have the ProDOS FST (PRO.FST) in
the same folder. This lets you read ProDOS partitions which may be included
along with ISO 9660 partitions on a data CD-ROM disc.
Once the above items are checked, Shut Down your IIgs. Turn it OFF. Turn
OFF the CD ROM drive. Wait 10-20 seconds. Turn ON the CD ROM Drive. Wait a few
seconds and turn ON your IIgs. Boot System 6.01.
Your SCSI card manual and/or information supplied by the CD-ROM drive
seller is the best guide for doing any necessary setup chores. If a SCSI hard
disk or Zip Drive is already connected and working, it's likely that no special
setup will be necessary.
Note: If the CD-ROM drive is the only SCSI device on the chain and you are using
a RamFAST along with a ZipGS accelerator, be sure to run RAMFAST.SYSTEM after
booting in order to change at least one setting. You want to click [O]ptions and
set "TransWarpGS" to "NO".
Playing a Music CD
Click on Control Panels in the Apple Menu. Select the Media Ctrl control
panel. I have "1" for Media Channel, "RF.NEC" (the name of the driver) for Media
Device, and "GAME PORT" for Port. After entering your settings, close the panel.
This will save your setup in a file named "Media.Setup" in the same
Media.Control folder which contains your media control driver.