User`s guide

o Switch 3: IRQ from 6818
o Switch 4: NMI from 6818
______________________________
From: Cyrus Roton <[e-mail]>
015- What are the switch settings for the old Apple
Serial Interface card?
The switch settings are as follows:
1 2 3 baud rate
on on on 110
off on on 134.5
on off on 300
off off on 1200
on on off 2400
off on off 4800
on off off 9600
off off off 19200
sw 4 off = enable delay after CR
5 6 line wt video
on on 40 enable
off on 72 disable
on off 80 disable
off off 132 disable
sw 7 off = enable LF after CR
______________________________
From: Supertimer
016- I've heard that I can use some sort of printer cable
to do NULL modem transfers with between my IIc and a PC.
Which cable?
Get an "Apple IIc to ImageWriter I" cable. It has a DIN-5 plug on one end
and a standard Dsub-25 plug on the other with the correct line swapping for NULL
modem. Depending upon whether your PC connection is to a 25-pin or 9- pin port
and whether or not an extension cable is used, you may also need a Dsub-25 to
Dsub-9 cable and/or a Dsub-25 gender changer. (The latter are standard items at
many computer stuff stores.)