User`s guide

____________________________
From: Gareth Jones
011- What telecom programs run on Apple II computers?
KERMIT: Available in DOS 3.3 and ProDOS versions, this freeware runs on any
Apple II. (On a GS, you need to turn the "DCD Detect" option OFF in the modem
control panel.) KERMIT is little harder to set up and use than some other
telecom software; but, works fine for Kermit and X-Modem transfers. It supports
VT52, VT100, and dumb terminal emulations.
ZLink: a ProDOS system program that requires a IIe, IIc, or IIgs. It supports X-
modem and Y-modem file transfers; VT100 and partial VT220 emulations. The
"macro" program that comes with it is simple, but fine for some things, like
auto-entering your password. A nice feature is that ALL the options are shown
and set in a single screen display, reached by pressing Open-Apple-?. I used
this program quite happily for a number of years, so it is probably worth a
download to see if it meets your needs.
Talk is Cheap 4.0: An excellent program for the IIe, IIc, or IIgs. It requires
an accelerator chip (e.g. a Zip Chip) in a IIe or IIc to communicate over 4800
baud. With the accelerator chip, you're fine up to 19,200 baud. It has an
excellent scripting language, which was used as the basis for Spectrum's
scripting language. File transfer protocols are X-modem (various types, such as
4K X-modem and 1K X-modem) and Y-modem (for downloads). The manual is a good
tutorial for telecommunications. You may be able
to find an early shareware version on the net.
ProTerm 3.1: This has been the most popular commercial telecom program available
for the Apple II. The program supports many emulations, every file transfer
protocol I know (including Kermit), and if you have a mouse, it'll give a mouse
and pull-down- menus environment.
Telcom: Similar to ZLink in features (except no macros), this is a free never-
finished commercial product by Jawaid Bazyar for IIgs only. Featuring a mouse-
and-menus interface implemented on the text screen, Telcom offers X-modem
uploads and downloads, Y-modem downloads, and VT100 or ProTerm Special Extended
terminal emulations.
Spectrum: This is the ONLY GS/OS telecom desktop program (i.e., standard menus,
the system clipboard for cutting and pasting, etc.). VERY strong scripting
language that even supports sounds, icons, fonts, colours, clickable buttons
(like HyperCard). It supports most terminal emulations, many file transfer
protocols (e.g. Z-modem, though not Kermit. Yet). The author and publisher have
released version 2.0 and are committed to developing it further.
ANSITerm: from Parkhurst Micro Products. Paul Parkhurst's program is supposedly
the best colour ANSI graphics available on a GS. It supports macros, many file
transfer protocols, and there is a demo version to try out. GS users only.
______________________________
From: Rubywand