User`s guide

Switch one doesn't matter unless you want to send a high bit through. If you

don't care about printing high ASCII (language characters, legal and math

symbols, box edges), then it can be set either way.

______________________________

From: Scott G

012- What printers will the Harmonie drivers work with on

my GS?

The 4550 automatically senses Epson LQ code and turns on emulation. It is

like if the DIP switch were set to automatic in older BJC models.

______________________________

From: Jim Stafford

My Canon BJ 600 works fine with the above driver. The only thing the driver

doesn't do is color!!! Make sure you have the epson dip switch set on your

printer(see the manual).

______________________________

From: Joe Kohn

I know for a fact that Harmonie supports HP LaserJets, DeskJets, and

DeskWriters.

Tony Diaz (of Alltech Electronics) brought home an Epson Stylus 600 and

connected it to the IIGS. Of all things, the first thing he tried was Print Shop

GS, and he said it printed out beautifully, in full living color. The margins

were all correct, and everything else about it was right...using the PSGS Epson

LQ driver.

He was also able to output text at 360 x 360 from EgoEd, using Harmonie's

Epson LQ4000 driver; and, he could dump text to the printer with a PR#1 from the

Applesoft prompt. So, apparently these Epson Stylus printers do have internal

fonts and can be used from ProDOS-8.

Tony was able to print out a graphic from Platinum Paint at 360 dpi; but,

only in grayscale. In Fact, so far, everyone reports that they can print in full

glorious color from Print Shop GS, but that, when printing from GS/OS via

Harmonie's EpsonLQ drivers, the printout is limited to grayscale.