User`s guide

1084 model with Dsub-9 IIgs Dsub-15
(Analog mode)
1 GND 13 GND (Blue)
3 Red 2 Red
4 Green 5 Green
5 Blue 9 Blue
7 Composite Sync 3 Composite Sync
1084 model with DIN-6 IIgs Dsub-15
Analog Connector
1 Green 5 Green
2 Horizontal Sync 3 Composite Sync
3 GND 1, 6, 13 GND's
4 Red 2 Red
5 Blue 9 Blue
6 Vertical Sync (NC)*
*Note: DO NOT hook up Pin 6 (Vertical Sync). Just chop it off.
______________________________
From: Ruud
Here's a different approach: my Powermac 7500 is right next to my IIgs; so,
I plugged its composite video output into the video-in port of the 7500, started
Apple Video Player, and lo and behold, it *is* possible to use your 1024*768
multires RGB Powermac monitor as a IIgs monitor, in a pinch. Color is all washed
up, but mono is OK.
______________________________
From: Stefan Voss, Joakim Ögren
016- What are the pinouts for Commodore's 1084 monitors?
1084 & 1084S Monitor Analog Connector
6 PIN DIN FEMALE viewed at the monitor
_______ Pin# Signal
/ 3 \ Pin 1 G Green
/ 2 4 \ Pin 2 HSYNC Horizontal Sync
| 6 | Pin 3 GND Ground
\ 1 _ 5 / Pin 4 R Red
\__/ \__/ Pin 5 B Blue
Pin 6 VSYNC Vertical Sync