User`s guide

Apple II Csa2 FAQs: Applications, Part 4/25 Note from archiver<at>cs.uu.nl: This
page is part of a big collection of Usenet postings, archived here for your
convenience. For matters concerning the content of this page, please contact its
author(s); use the source, if all else fails. For matters concerning the archive
as a whole, please refer to the archive description or contact the archiver.
Subject: Apple II Csa2 FAQs: Applications, Part 4/25
This article was archived around: 07 Jun 2009 08:31:36 GMT
All FAQs in Directory: apple2/faq
All FAQs posted in: comp.sys.apple2
Source: Usenet Version
Archive-name: apple2/faq/part4
Posting-Frequency: monthly
Last-modified: 2009/06/01
URL: http://home.swbell.net/rubywand/A2FAQs1START.html
The comp.sys.apple2 Usenet newsgroup Apple II FAQs originate from
the II Computing Apple II site, 1997-2009.
Csa2 FAQs file ref: Csa2APPLICS.txt rev135 June 2009
Applications
001- What Operating System environments does the GS support?
002- What GS programs are there for viewing/converting graphics?
003- What Apple II emulators are available and where can I get them?
004- What is a good file copier program for the IIgs?
005- Where can I find PEEKs & POKEs and monitor routine info?
006- How can I boot a good GS System with no hard disk?
007- Can I do Reverse Speech on my IIgs?
008- Is it possible to run PaintWorks from hard disk?
009- How can I read a single ProDOS block into memory under BASIC?
010- Is there an Apple II program for ham radio CW code practice?
011- Can my GS do file sharing with a Mac's hard drive?
012- How can I use a Mac as a network server with my GS?
013- How can I set up an Appletalk network for 30 IIgs's
014- How can I capture a GS super-res screen to disk?
015- What programming languages are available for the Apple ][?
016- How can I see and edit what's in a Text file?
017- How do I save a BASIC program in ASCII text form?
018- Where and how do I get GS System 6.0.1?
019- Is a graphical user interface (GUI) available for 8-bit A2's?
020- Where can I get Applesoft shape table info and programs?
021- How can I get a Postscript file from a GS document?
022- Where can I get Appleworks and Appleworks info?
023- Where can I get Apple II languages and programming info?
024- How can I boot DOS 3.3 images on the Bernie IIgs emulator?
025- Is there a way to convert two-column Text to one column?
026- Where can I find an Apple II memory map?
027- How can I move A2 programs to Quick BASIC on my PC?
028- How can I read .doc files under Windows?