User`s guide

o- Set "Minimum RAM Disk Size" and "Maximum RAM Disk Size" to the the same value
= size of the RAM disk you want. If you have enough RAM left over to start your
operating system and run your favorite application, a good RAM disk size is
800k.
o- Press Return to set the value. Exit the Control Panel. Exit the Desk
Accessories menu. Turn OFF the computer.
When you next power up your computer, your RAM disk will be ready to use.
______________________________
From: David Empson
023- Which 3.5" drive/interface combinations work on a
IIe?
For the UniDisk 3.5 (model number A2M2053), you need either Apple's
"SuperDrive" card or the "Liron" card. The UniDisk 3.5 is quite rare. It is a
clean white color instead of greyish "platinum". It also has the eject button
just above the line of the disk insertion slot, with a separate manual ejection
hole.
The "Liron" card's official name is "Apple 3.5 Floppy Disk Drive Interface
Card". It has the word "Liron" on the back (which is the nickname of the IWM
disk controller chip, if I remember right).
For the Apple 3.5 Drive (model A9M0106 as used on the IIgs), you need
either Apple's "SuperDrive" card or the third party "Universal Disk Controller"
card. The drive is platinum in color and has the eject button in line with the
disk insertion slot and the ejection hole is in the middle of the button.
The "SuperDrive" card's official name is "Apple II 3.5 Disk Controller
Card". The card has an LED on top, and has its own processor, RAM and ROM.
For the Apple SuperDrive, you need the "SuperDrive" card. Model ID is
inconsistent. Check for something like "Family number G7287".
The SuperDrive looks exactly the same as the Apple 3.5 Drive. It supports
1.44 MB high density and 720 KB double density disks as well as the 400 KB and
800 KB formats. You can use a SuperDrive with the Universal Disk Controller
card, but you won't be able to use its extra capabilities, and it will behave
like an Apple 3.5 Drive.
______________________________
From: O Aaland and Michael Pender
024- How can I boot from my /RAM5 RAM disk? All the files
are there but it just beeps at me and says 'check startup
device'!?