User`s guide

0911 and 09010001 (FATAL SYSTEM ERROR 0911); was error number 0400 on ROM-00
machines. Fatal System Error 0911 and Diagnostic Self-Test error code 09010001
mean the same thing: You are experiencing an ADB "can't sync" problem which,
usually, seems to relate to a hardware malfunction.
See Csa2HDWHACK.txt for more discussion and possible fixes.
--Rubywand, David Kopper, Guenther Unger, Gabriel Hawkins, Michael Mahon
-------
0C000003 GS Diagnostic Self-Test error/ Sound Test: Data register failed
There is one possible reason for this failure code being reported by the self-
test: do you have a ZIP GS accelerator in the machine? The ZIP GS, if enabled,
causes the IIgs to fail some of its self-tests (only because the tests are
relying on the speed at which the processor normally operates, and get confused
because the CPU is running faster than expected). If this is the case, you must
turn off the computer and disable the ZIP GS by setting switch 1-6 OFF before
you can run the self-test properly. --
David Empson
-------
1102 "OMF version error"- When trying to launch some GS programs I am
encountering the following error message:
Sorry, system error $1102 occurred while trying to run the next application.
Return to launching application or restart system.
So, whats wrong with my IIgs and how do I fix it?
Probably, there is nothing wrong with your IIgs. The "incompatible Object
Module Format" error appears to indicate that your versions of the problem
programs are, in some ways, not compatible with your operating system. Try
launching the program from an earlier version of System or after booting an old
"ProDOS-16" diskette. --Rubywand
-------
1104 "file is not a load file"- I downloaded some GS Desk Accessories fine; but,
when I try to use them I get this error. How come?
Error $1104 is reported by tool $0B11 LoadSegNum (tool $0B in toolset $11).
The error is reported if a check of a file's directory entry shows that the file
is not file type $B3-$BE.
If an NDA or CDA were downloaded and its file type were not preserved, then
the file might be okay, but it would not be recognized as a load file. Try
changing the file type ($B9 for a CDA; $B8 for an NDA). An NDA named
"File.Manager" by Jeff Hartkopf and Glen Bredon's ProSel-16 are two utilities
that allow changing file type. --Rubywand
-------