Specifications

Chassis Plans CPX1-241 Technical Reference Appendix F – Network Connection
Page 59
Configure
 Firmware Version Firmware version of CPX1-241
 MAC Address MAC address of IP controller
 Host Name ID name without space (max. 15 character)
 DHCP DHCP client mode enable/disable
 IP Address IP address (assigned automatically if DHCP mode enable)
 Subnet Mask Address Subnet Mask Address
 Default Gateway Address Network Gateway Address
 Primary DNS Address Network DNS Address
Image F-3 – Network Configure Settings
In cases where the CPX1-241 is setup behind a firewall and cable/ADSL modem. The following provides details
so it can be directly accessed over internet by typing the dedicated IP address on web browser.
Connect to a single CPX1-241
 Connect the CPX1-241 to a router using Cat-5 cable.
 It is suggested to use “DMZ” function on the router. The standard ports required by the CPX1-241 is
shown as below:
Table F-1 – Remote Control
To setup DMZ function on your router, you may refer to the following procedure for your reference. (Different
routers will has its different setup methods; please refer to the user manual of your router.)