Specifications

Chassis Plans CPX1-241 Technical Reference Chapter 7 – LCD Operation
Page 28
setting “OFF”.
Auto Power : OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
De-interlacing Mode* 
AFM : Auto Film Mode
TNR : Temporal Noise Reduction
MADI : Motion Adaptive De-interlacing
DCDi : Low Angled De-interlacing
[See Appendix VI for AFM, TNR, MADI, DCDi function description]
Video Wall Setup 
Video Wall
Video Wall Size : Choose the video wall size (Number of panel for horizontal [max
4] x Number of panel for vertical [max 4]).
Video Wall ID Setup : Set the matching ID number same as the ID number shown
on screen. For details, please refer to the application note
of the video wall setup.
Bezel Compensation 
Bezel Compensation
Active Area (H) (mm) : Type in the active area in horizontal with reference to the
panel specification
Active Area (V) (mm) : Type in the active area in vertical with reference to the panel
specification
Bezel Opening Area (H) (mm) : Type in the bezel opening area in horizontal with
reference to the panel specification.
Bezel Opening Area (V) (mm) : Type in the bezel opening area in vertical with
reference to the panel specification.
Enable RGB SOG: OFF / ON
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
Gamma : 0.6 / 0.7/ 0.8 / 1.0 / 1.6 / 1.8 / 1.9 / 2.0 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / User Setting
OSD 
OSD position :
H POS : Move the OSD menu image horizontally
V POS : Move the OSD menu image vertically
OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5
seconds (max 60 seconds)
ON =
Continuous to display OSD menu.
60 = 60 seconds later will turn off the OSD menu.
Screen Marker 
Screen Marker : On/Off
Center Marker : On/Off
Safe Area Enable : On/ Off
Aspect Marker Enable : On/Off
Safe Area Market : 80%~99%
Aspect Marker : 4:3 / 16:9
Transparency Level : 0% / 25% / 50% / 75% / 100%
Exit menu
Language : English / Spanish / French / German / Chinese :Select OSD menu language
display
Transparency : OFF / ON : Set OSD transparency
Display Input : OFF / ON : Display input source info after switching source.
Real time clock  show and edit the real time clock (This function is valid when “Display Input”
sets ON.)
DATE : DD/MM/YYYY : Date/Month/Year
TIME : HH/MM/SS (AM/PM): Hour/Minute/Second
SETUP 
Month / Day / Year
Hour / Minute / AM/PM
Display Clock : Disable or enable to display the real time clock when
display video source info after switching source.
Freeze : Freeze the image (use “+” button)
Zoom 
Zoom level : : Enable the zoom in function on the image displayed.
Use “+” button to zoom in the image