Specifications

Chassis Plans CPX1-241 Technical Reference Chapter 7 – LCD Operation
Page 26
LCD Controller OSD Menus
OSD functions
Picture :
Volume
###
Increase/decrease volume level, total: 100 steps
Brightness Increase/decrease panel brightness level, total: 100 steps
Contrast Increase/decrease panel contrast level, total: 100 steps
Saturation Increase/decrease saturation, total: 100 steps
Hue ** Increase/decrease Hue level, total: 100 steps
Sharpness* Increase/decrease sharpness, total: 30 steps
Backlight Backlight brightness adjustment (Functions when
light detector sets OFF)
Position
##
Aspect / Size 
- Fill Screen : Enable full screen expansion for lower resolution Image
- Fill to Aspect Ratio: Enable fill screen expansion for lower resolution
image according to aspect ratio
- 4 : 3 : scaling format in 4:3
- 16 : 9 : scaling format in 16:9
- 16 : 10 : scaling format in 16:10
- 2.35 : 1 : scaling format in 2.35:1
- 2 : 1 : scaling format in 2:1
- 1 : 1 : Display the exact image resolution on the screen without
image expansion.
- Custom Sizing* : (The name will change depends on the scaling mode
selected.)
- Overscan
- Normal
- Custom/Underscan Sizing 
H Size
V Size
H Pan
V Pan
Blue Only ON / OFF : Turn off the "Red" & "Green" channel (i.e. output all
zero to Red & Green channel)
[This function will display on OSD menu when JP4 – 5-6 closed]
* : DISPLAY IN VIDEO MODE ONLY
** : FUNCTION IN ARGB/ DVI / VIDEO NTSC MODE ONLY
# : DISPLAY IN ARGB / DVI MODE ONLY
## : FUNCTION IN ARGB MODE ONLY
### : DISPLAY WHEN AUDIO ADD-ON BOARD CONNECTED
Source : Select the input video signal
Main Port Change 
VGA
DVI
HDMI
+
HD/SD SDI 1
++
HD/SD SDI 2
++
Composite 1
Composite 2***
S-Video 1
Move the image position upward
Move the image position downward
Move the image position to the left
Move the image position to the right