User`s manual

User's manual System Amplifier K&F TOPAS

8. Technical SpecificationsTOPAS

8.1 Amplifier

Output power

(IEC: 1 kHz, 1% THD, both channels)

2 x 1100 W / 2 Ohm

2 x 1000 W / 4 Ohm

2 x 500 W / 8 Ohm

Bridge Mode 1 x 2050 W / 4 Ohm

1 x 2000 W / 8 Ohm

THD 0.02% @ 2/3 of rated power, 8 Ohm

Frequency Response 20 Hz - 20 kHz (-0,3 dB)

Gain 21 dB - 39 dB

SNR (signal noise ratio) > 102 dB

CMR (common mode rejection) > 75 dB

Mains Connector Powercon

Mains Voltage 115/230 V with softstart function

Rated Power 7 A

Ventilation 3 temperature-controlled quality fans

Optional AES input with bufferd link output

Hardware bypass if no mains voltage is

present.

8.2 Signal Processing

Digital signal processing 24 bit / 96 kHz (AD- and DA-converter)

32 bit / 96 kHz (DSP: 96 kHz sample rate,

32Bit)

Latency (analogue in / analogue out) 1.3 ms

Audio In-, Outputs 2 symmetrical inputs on XLR and Phoenix

2 Speakon NL4, Phoenix

2 symmetrical Link-Outputs (XLR)

Input impedance: 20 kOhm (symmetrical)

Nominal Input Level 18 dBu @ 21 dB

12 dBu @ 27 dB

6 dBu @ 33 dB

0 dBu @ 39 dB

Aux-input (PRIO) 1 symmetrical input on Phoenix with

switchable priority

GPI 4 freely assignable inputs with analogue

voltage levels of 0-10 V,