User`s manual

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 4 of 65
5.5.3 Input Signal Processing 23
5.5.3.1 Input Sensitivity 24
5.5.3.2 Routing 24
5.5.3.3 Gain Control 24
5.5.3.4 Front Panel Gain Control 24
5.5.3.5 Delay 25
5.6 Control 26
5.6.1 General Purpose Input/Output (GPIO) 26
5.6.1.1 Control Inputs (GPI) 26
5.6.1.2 Control Outputs (GPO) 26
5.6.2 Control via the Kling & Freitag Remote Software 27
5.6.3 Control via the XML Scripts 27
6
Web Interface 28
6.1 Menu Overview 28
6.2 Web Interface Status 29
6.3 Web Interface Audio 31
6.3.1 Audio Settings 31
6.3.2 Speaker Configuration 33
6.3.3 Input Configuration 34
6.4 Web Interface Setup 35
6.4.1 Software Update 35
6.4.2 Network Settings 37
6.4.3 Device Description 38
6.4.4 Password Administration 39
6.4.5 Power-On Options 40
6.4.6 Settings Controls 41
6.4.7 Settings GPIO 42
6.4.8 Backup 45
6.5 Web Interface Help 46
6.5.1 Help Topics 46
6.5.2 Contact Address 47
6.5.3 Amplifier Information 48
7
Service 49
7.1 Hardware 49
7.1.1 Replace/Clean the Air Filters 49
7.1.2 Replacing the Fuse 49
7.1.3 Replacing the Backup Battery of the Real Time Clock 49
7.2 Troubleshooting 50
8
Technical SpecificationsTOPAS 52
8.1 Amplifier 52