User`s manual

User's manual System Amplifier K&F TOPAS

Channel 1:

• RMS-Level: Audio signal level

• Limiter: status notification of the peak limiter (PK), RMS limiter (RMS) and current (CUR)

• Clipping: status notification of the analogue input (ADC) and the amplifier module

(AMP)

• Channel 1: toggle between 'On' (open channel) and 'mute' (channel off)

• Input-Routing: Switches between 'Input 1', 'Input 2' and 'Monomix(-6dB)'

• Delay: Input in ms, max. 2000 ms

• invert Phase: invert Phase 'on' or 'off'

• Gain: Enter gain in dB, this value is the volume level of the amplifier itself.

The total gain of the corresponding TOPAS is the sum of 'Group Gain' and 'Gain'.

• Group Gain: Enter gain in dB, this value will be specified by the remote software in the

future.

• Filter: Possibilities to set four free selectable filters, 'Type', 'F[Hz]', 'Q', G[dB] and

activation of this setting

Channel 2 has the same settings as channel 1.

Further information about filters and their functionality, see page 57.