4.2

file that can be imported back into Compressor at a later time.
You can also import a command set.
Export a command set
1. Choose Compressor > Commands > Customize.
The Command Editor appears.
2. Select the command set that you want to export from the pop-
up menu in the top-left corner of the Command Editor.
The command set you selected should have a checkmark to
the left of its name in the pop-up menu.
3. In the same pop-up menu, choose Export.
4. Type a name for the command set in the Save As field,
navigate to the location where you want to save the exported
set, then click Save.
The file is saved in the location you chose, with the filename
extension .commandset.
Import a command set
1. Choose Compressor > Commands > Import.
2. In the window that appears, navigate to the location where
you’ve stored a command set file, select it, and click Open.