4.2

area.
7. Select all the jobs in the batch area, and from the Settings
pane, drag the Dailies Output destination onto any of the jobs.
Dragging to any one of the jobs applies the destination to all
selected jobs in the batch area.
8. Switch to the Locations pane and drag the custom location
you created in step 4 onto any of the selected jobs in the
batch area.
The location is added to all selected jobs.
9. Select the first job in the batch area and, in the Action area of
the Job inspector, fill in the email To, Subject, and Message
fields.
If the inspector pane is not showing, click the Inspector button
in the upper-right corner of the Compressor window. You
can enter multiple email addresses in the To field, as long as
each address is separated by a comma. Also, be sure to
include a link to the location of the saved files in the Message
field.
10. Select each of the subsequent jobs and repeat step 9, until
each job’s Action section in the Job inspector is filled out
completely.
11. Click Start Batch (or press Command-B).
Tip: If you’re transcoding many files to be saved in one
location, consider only sending an email when the last file is
completed. That way your recipients won’t receive an email