4.2

incorrect fields when creating the 23.98 fps video.
The reverse telecine feature in Compressor automatically detects
broken cadences and adjusts processing as needed.
Perform a reverse telecine frame rate
conversion
1. Do one of the following:
In the batch area, click an output row to select a setting in
a job. With this method, the modifications you make will be
used for outputting only that job.
In the Settings pane, select a custom setting from the
Custom area. (If the Settings pane is hidden, press Shift-
Command-1.) With this method, the modifications you
make will be saved to the custom setting for future use.
2. In the inspector pane, click Video to open the Video inspector.
If the inspector pane is not visible, click the Inspector button
in the upper-right corner of the Compressor window.
3. In the Video Properties section of the Video inspector, choose
29.97 from the “Frame rate” pop-up menu.
4. In the Quality section of the Video Inspector, choose Reverse
Telecine from the “Retiming quality” pop-up menu.
5. If you’re modifying the setting of a specific job, click Start
Batch to begin transcoding.