4.2

Custom group. (If the Settings pane is hidden, press Shift-
Command-1.) With this method, the modifications you
make will be saved to the custom setting for future use.
2. In the inspector pane, click General to open the General
inspector.
If the inspector pane is not visible, click the Inspector button
in the upper-right corner of the Compressor window.
3. In the Retiming section of the General inspector, modify the
“Set duration to” property in one of the following ways:
Enter a specific percentage of the source footage in the
percentage field, or choose a preset percentage from the
pop-up menu (with a downward arrow).
Note: Selecting a setting from this pop-up menu does not
change the frame rate of the output file. If you want to
create a file at a frame rate other than the source’s original
rate, you must change the setting in the Video inspector.
Click to select the button next to the timecode field and
enter a specific duration for the outgoing file. (The
percentage field above will automatically update.)
Note: This option is available only when you’re modifying a
setting that’s part of a job.
Click to select the “So source frames play at [frame rate]
fps” button.
Note: The frame rate used in this option is the value set in
the “Frame rate” property in the Video inspector.
Change the frame rate for a transcoded file