4.1

Chapter 5 Advanced tasks 63
2 Click the Add Outputs button under the source media le, and then choose a transcode setting
and save location in the window that appears.
The job now contains a source le made of sequential images and output instructions (a setting,
a save location, and an output lename).
3 To view additional information about the job in the Job inspector, select the job in the
batch area.
The Job inspector appears on the right side of the Compressor window. (If the inspector pane is
hidden, click the Inspector button in the upper-right corner of the Compressor window.)
The Job Inspector displays information about the image sequence source le, including the
location of the les, size and frame information, and the duration of the sequence. Further down
in the Job inspector, you can view a list of the individual image les that make up the sequence.
4 If necessary, you can specify eld order and frame rate for the source le, or click the Choose
button to add an audio le to the image sequence source le.
You can work with the image sequence source le as you would any other source le, adding
additional settings or a destination to the job before transcoding. For more information, see
Simple transcoding overview on page 11.
You can also use Compressor to output an image sequence. For more information, see Image
Sequence on page 33.
67% resize factor