3

To change the cluster storage path to an Xsan volume
µ
Enter the following:
qmasterprefs -cluster off storagepath /Volumes/XsanVol
To change the number of Compressor Processing services from 2 to 4
µ
Enter the following:
qmasterprefs -service "Compressor Processing" off sharing on instances 4
To turn off the Rendering service
µ
Enter the following:
qmasterprefs -service Rendering off
To turn on unmanaged services for Compressor Processing
µ
Enter the following:
qmasterprefs -service “Compressor Processing” on unmanaged on
To configure a service-only node
µ
Enter the following:
qmasterprefs -stopSharing -sharingType servicesOnly -startSharing
To create a QuickCluster
µ
Enter the following:
qmasterprefs -stopSharing -sharingType servicesAndQuickCluster -startSharing
Shell Commands for Submitting Compressor Jobs
You can run the Compressor application from the command line using the Compressor
command, with a number of command-line options for submitting jobs.
In the command-line descriptions below, angle brackets < > indicate a mandatory
argument in a command, and brackets [ ] indicate an optional argument.
Synopsis
Below is a synopsis of the command for submitting a job to a cluster. The Compressor
command is located in /Applications/Compressor.app/Contents/MacOS/.
Compressor [-clustername <name>][-clusterid
<username:password@ipaddress:portNumber>] [-batchfilepath <path>] [-batchname
<batchname>] [-priority <value>] [-jobpath <path>] [-settingpath <path>]
[-destinationpath <path>] [-info <xml>] [-timeout <seconds>] [-help] [-show]
In this example, -jobpath, -settingpath, and -destinationpath can be repeated as
many times as the number of jobs you want to submit.
Note: Not all the options are necessary. For example, you can specify the cluster either
by its -clustername or by its -clusterid. You do not need to specify both. If both are
specified, only -clusterid is used.
362 Appendix C Using the Command Line