User Manual
Chapter 7 Advanced functions 154
Add and adjust lters
Use the Filters pane in the Inspector to add video and audio lters to your settings. If you want
to modify only a single media le, you can add lters to a setting already applied in the Batch
window. If you want to modify a custom setting permanently, you can add lters to the custom
setting in the Settings tab. That way, all future jobs you apply the setting to will be modied by
your chosen lters.
Note: In the Settings tab, lters can be applied only to custom settings. If you want to apply lters
to any of the Apple-supplied settings in the Settings tab, rst you must duplicate and save that
setting to the Custom folder. For more information, see Create and modify settings on page 35.
Apply and adjust lters
1 Do one of the following:
•
To apply a lter to a single media le: Select the media le’s setting in the target area of the
Batch window.
•
To apply a lter to a custom setting in the Settings tab: Select the setting in the Custom folder.
2 Click the Filters button in the Inspector.
The Filters pane opens, displaying the Video, Audio, and Color tabs.
3 Depending on the type of lter you want to apply, click the Video tab or Audio tab.
A list of available lters appears.
4 Select a lter in the list, and make adjustments to the controls in the lower part of the Inspector.
When you make adjustments to a lter, a checkmark appears beside the lter name in the lter
list, indicating that the lter has been applied to the setting.
Any changes you make
to a filter’s settings
apply to the currently
selected filter.
The filter is automatically
selected if you make any
adjustments to it.