Specifications

4. If
your monitor
has a
separate
power
cord,
plug it into
the
power
socket
in
the back
panel
of
the
monitor.
Make sure
you get
a
firm
fit. A
loose
connection
can cause a
flickering display.
5.
Plug
the
monitor power
cord
into
a
pov/er
outlet.
If
you
have
not
plugged in
your
other
power
cords,
plug
them
in now.
You
are
now ready
to start up the computer and adjust the
monitor.
Turning
the
monilor
on
Locate
the
On-Off button and
press it.
(See
Figure
3
and
Figure
4.)
The
green
power
indicator light
should
light up in the
lower-right
corner of the
monitor.
If it
does
not
turn on,
press
the button
again.
On-Off bution
On-Off button
Figure
3
AppleColor Composite
Monitor On-Off button
* Note: If
the
power
indicator
light
still does
not
come on,
check
to see
if
the
power
cable
is
properly plugged in
at both
ends.
If
it
is, find
out
if
the
power
to the
wall
socket or
power
strip
has been
interrupted.
(You
can test the outlet by
plugging
something
else
into it-like
a desk
lamp
or
a
radio.If
the test
appliance
works
and
the
monitor
does
not,
consult
your
authorized
Apple
dealer.)
Figure 4
AppleColor Composite
Monitor lle On-Otf button
AppleColorrM Composite Monitor Owner's Gulde