Specifications

Chonging
the
viewing
ongle
After setting
up
your monitor,
if
you find
the
viewing
angle
too
low,
you
can
raise
it
by
using
the
Height-Adjustment
bar
on tlee
bottom
of
the
monitor.
The
Height-Adjustment
bar
raises the
front of
your
monitor one
inch off
the computer
or desk
surface.
Follow
these
steps
to
raise
the
viewing
angle:
1.
Gently
turn
the
monitor
on
its side.
2. Locate the
Height-Adjustment,
bar.
It's the bar
about
ten
inches
long
and
an
inch wide that's
positioned
parallel to
the
bottom-
front
edge
of the
monitor.
(See
Figure 5.)
Figure
6
3.
Pull
the bar
off
the
bottom
of the
monitor and
turn
it
so
that
the
slots
on the
flat
side
of
the bar
face toward
the
back
of the
monitor and the
slots
on the
edge
of
the bar
line up
with the
plastic
guides
on
the bottom
of the
monitor.
4. Push
the
bar
onto
the
plasric
guides.
5.
Gently
return the
monitor to
its upright
position'
Chonging
the
viewing
ongle