User`s manual

Your ColorSync monitor appears as a VGA monitor in the Control Strip pop-up menus.
m Make sure the ADB connector on the monitor cable is plugged directly into
your computer’s ADB port.
m Reinstall the software that came with your monitor. See Chapter 2,
“Installing and Using Apple Displays Software,” for more i nformation.
You hear no alert sound.
m Make sure the aler t volume control is set correctly. Click the Alerts button
in the Monitors & Sound control pan el and reset the System Alert Volume.
Your third-party driver no longer shows up in your Monitors & Sound control panel.
m Some Mac OS–based sound drivers require the Sound control panel, an
older control panel that has b een replaced on your computer by the
Monitors & Sound control panel. You can reinstall the Sound control
pan el. Open the Apple Extras folder on your hard disk and double-click the
Apple Displays Extras folder. Double-click the Sound control panel icon.
Changes in the Monitors & Sound control panel don’t work for the monitor.
m Make sure you have installed the software that came with your monitor.
m Because each monitor connected to your computer has its own Monitors &
Sound window, use the wi ndow that displays the name of your monitor in
the top-left corn er.
When you open the Monitors & Sound control panel, only one resolution is available.
m Make sure you have connected the ADB connector to your computer. You
cannot use many of th e features of the Apple Displays software without an
ADB connection. See “Connecting the Monitor Cable to a Mac OS–Based
Computer” in Chapter 1 for more information.
m If Apple Displays software is installed a nd you start up your computer
holdi ng the Shift key down, th e Display Enabler extension will not load
and the software will not run. Restar t your computer without disabli ng
extensions to use the software.
m Reinstall the software that came with your monitor. See Chapter 2,
“Installing and Using Apple Displays Software,” for more i nformation.
52
Chapter 4