User`s manual

Ins talling C olorSync Displ ay setup inform ation for Win d ows
On Windows systems, new devices are automatically detected when they
are connected to your computer (if it is VESA DDC compliant). If you are
not using Wi ndows, see the manual that came with your video card for
setup information.
To determine that Wi ndows has correctly identified your monitor, check
Monitor Type in the Display Properties dialog box. Performing this ch eck
will ensure that th e ColorSync Display setup i nformation has been installed.
Not installing the setup infor mation may limit the resolution and refresh rates
on your monitor.
To correctly identify the monitor type in your computer, follow these steps:
1 Open the Start menu and choose Settings.
2 Open the Control Panel and double-click the Display icon.
The Display Prop erties dialog box app ears.
3Click the Settings tab at the top of the dialog box.
The Settings prop erty sheet appears.
4Click the Change Display Type button in the lower-right corner to display the current
Monitor Type.
If the Monitor Type shown is the ColorSync Display, your computer has
correctly identified your monitor. Go to the n ext section, “Screen Controls at
a Glance.”
If the Monitor Type shown is not the ColorSync Display, conti nue with step 5.
5Click the Change button next to the Monitor Type field; then select ColorSync Display
and click OK.
If the ColorSync Display is not on e of the devices displayed, then the setup
information file needs to be installed.
36
Chapter 3