User`s manual

Connecting the power cord
1Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
2Plug the other end of the power cord into a grounded outlet or power strip.
Note: You may have a power jumper cord instead of a power wall cord. In
this case, plug the power jumper cord i nto th e power socket on th e back of
your computer.
Connecti ng the monitor cable to a Mac OS–based computer
Conne cting to a standard monitor port
To realize the full capability of your monitor, you must connect it to the video
and ADB ports on your computer. The monitor cable is a split cable with two
connectors, one for video and one for the Apple Desktop Bus (ADB).
ADB connector
Monitor cable
Monitor connector
10
Chapter 1