Specifications

Adjustments Geometry - 18
2 Click the arrow buttons to adjust convergence. Adjust
convergence for the overall best screen color clarity.
Note: The active range for the horizontal convergence
controls varies from unit to unit. In most cases there is a
portion of the range that has no affect.
If the horizontal controls seem stuck, move the controls
in one direction a large extent and if no affect is seen,
move them in the other direction a large extent until a
change is detected. Moving back and forth in small
increments will have no affect until the controls are
moved into the active range.
3 Click OK to save your convergence changes and close the
Convergence Control window.
Note: If focus is poor after adjusting convergence, refer to
the Focus symptom in the Troubleshooting chapter.