Specifications

Troubleshooting Symptom Charts /Paper - 6
Blurring and/or
smudging
1 Adjust print head position lever all the way down.
2 Use specified media only.
3 Set printer to proper printing mode. See “User Menus” in
Basics chapter.
4 Make sure print head is in correct position. If necessary,
perform the adjustments described in “Print Head Gap” in
the Adjustments chapter (international repairers only).
5 Perform the “Print Head Cleaning” procedure; see the
Additional Procedures chapter (international repairers
only).
6 Check print head gap; see “Print Head Gap” in Adjustments
chapter (international repairers only).