User manual

95.08.23.09.18
Color LaserWriter 12/600 PS Take Apart 3–158
Oil-Overflow Sensor (PS10) (page 4 of 6)
4 Remove the two black screws and lift the long black trim piece from
the fuser. Remove the four brass-colored screws that secure the two
filter covers to the fuser chassis and remove the covers from the fuser.
Note: You need a small thin Phillips screwdriver to get at the four
screws securing the filter covers Be careful not to damage the lower
fuser roller when removing these screws.
12Trim Piece Filter Covers