User manual

95.08.23.09.18

Color LaserWriter 12/600 PS Take Apart 3–155

Oil-Overﬂow Sensor (PS10) (page 1 of 6)

First Remove the fuser access cover, fuser oil bottle, and the fuser assembly.

Set the fuser assembly down with the delivery side facing you.

Note: The photo-interrupter at oil-overﬂow sensor is available as P/N

922-1353

Now 1 Remove the tension spring that goes between the delivery roller mecha-

nism and the bottom plate of the fuser.

Tension Spring