User manual

95.08.23.09.18
Color LaserWriter 12/600 PS Take Apart 3–115
Toner Sensor (Receiver) (page 1 of 3)
First Remove the toner disposal box, photoconductor cartridge, toner
cartridges, inner panel 1, top cover, pickup block, and transfer drum
assembly. Raise the separation discharge assembly.
For this procedure, you will need a short Phillips screwdriver, no more
than 4 inches (10 cm) long.
Do not touch the sensor with your hands. If it gets soiled, clean it with
a lint-free paper or cloth.