User manual
95.08.23.09.18
Color LaserWriter 12/600 PS Take Apart 3–113
Printer Drive Assembly (page 2 of 2)
2 For clearance purposes, remove the two silver-colored screws that
secure the receptacle of the fuser interconnect cable to the chassis.
3 Carefully remove the printer drive assembly from the printer.
Replacement Note: Press the assembly straight inward while using a
slight side-to-side rocking motion. Give special attention to meshing
correctly the gears at the right side of the drive assembly.
Fuser Interconnect
Cable Receptacle
1
2