User manual

95.08.23.09.18
Color LaserWriter 12/600 PS Take Apart 3–108
Transfer Drum Assembly (page 1 of 2)
First Remove the toner disposal box, photoconductor cartridge, toner
cartridges, inner panel 1, top cover, and pickup block. Raise the separa-
tion discharge assembly.
Caution: Use cotton gloves when working with the transfer drum. Do
not touch the surface of the drum with your hands. If the surface gets
soiled, use only lint-free paper or cloth to clean it.
Now 1 Disconnect the 13-pin connector from the end plate of the transfer drum
assembly and remove the five silver-colored screws.
13-Pin
Connector
5
3
4
1
2