User manual

95.08.23.09.18
Color LaserWriter 12/600 PS Take Apart 3–106
High-Voltage Separation Assembly (page 2 of 3)
Note: For clearance purposes, you must loosen the I/O board housing
so that you can perform step 3.
2 Remove the four rearmost silver-colored screws that secure the I/O
board housing to the chassis, raise the housing slightly, and hold it.
3 Grasp the high-voltage separation assembly and shift it firmly to the left
to release the claw. Remove the assembly from the printer.
I/O Board Housing
1
2
3
4